Anti-Slip / Non-Skid Powder Coatings

Surface Finish Options Overview

Anti-slip powder coatings are specially formulated textured coatings designed to increase surface friction and prevent slipping. They are ideal for metal floors, handrails, stair treads, and public facilities where safety is critical. These coatings provide durable, long-lasting protection while maintaining aesthetic appeal.

Anti-slip coatings are formulated to have highly textured surfaces that provide a slip-resistant coating to increase the coefficient of friction (COF). A rougher surface, such as an anti-skid, would have a higher COF than a smooth slippery surface.

Applications & Use Cases

Key Advantages

Enhanced Safety – Reduces slipping risks on floors and surfaces.

Durable & Tough Finish – Resistant to wear, abrasion, and corrosion.

Customizable Texture – Various grit levels and finishes for different applications.

Eco-Friendly – Solvent-free, low VOC, compliant with global environmental standards.

Industrial B2B Ready – Suitable for OEM production and large-scale use.

Why Choose Our Anti-Slip Powder Coatings?

✅ Factory direct supply from China

✅ MOQ 100Kg, ideal for B2B industrial buyers

✅ Custom textures and colors available for different applications

✅ Fast global shipping to Europe, North America, Asia, and more

Get a Quote Today

FAQ

1. What is Powder Coating?

Powder coating is a dry finishing process used to apply a protective and decorative coating on metal or other surfaces. Instead of using liquid paint, fine powder particles (usually made of polyester, epoxy, or hybrid resins) are electrostatically charged and sprayed onto a conductive surface. The coated object is then baked in an oven, where the powder melts, flows, and cures into a smooth, durable finish.

Key features:

Durable, hard finish

Resistant to scratches, corrosion, and UV

Environmentally friendly (no VOCs)

2. Benefits of Powder Coating

Powder coating offers several advantages over traditional liquid painting:

Durability: Resistant to chipping, scratching, fading, and wear.

Corrosion Protection: Provides excellent protection against rust and chemicals.

Environmentally Friendly: No volatile organic compounds (VOCs) and minimal waste.

Efficiency: Overspray can be collected and reused, up to 99% material utilization.

Uniform Finish: Smooth, even coating without runs or drips.

Cost-Effective: Single-coat systems can achieve high film thickness, reducing labor and energy.

Aesthetic Variety: Wide range of colors, textures, and effects.

3. What Temperature to Cure Powder Coating

The curing temperature depends on the type of powder used:

Epoxy powder: ~160–200°C (320–392°F)

Polyester powder: ~180–210°C (356–410°F)

Hybrid (Epoxy-Polyester) powder: ~180–200°C (356–392°F)

Typical curing time: 10–20 minutes depending on thickness and oven type.

Always follow the powder manufacturer’s specifications for best results.

4. Process for Powder Coating

The powder coating process usually follows these steps:

Surface Preparation:

Clean the surface thoroughly (remove oil, grease, rust, or dirt)

Methods: chemical cleaning, sandblasting, or phosphating

Pre-Treatment:

Apply a conversion coating or primer if needed to improve adhesion

Powder Application:

Spray the powder using an electrostatic spray gun or fluidized bed

Curing:

Bake the coated object in an oven at the recommended temperature for the powder type

The powder melts and forms a continuous, smooth film

Cooling & Inspection:

Let the coated item cool

Inspect for defects, uniform coverage, and desired thickness

5. How to Spray Powder Coat

Equipment Needed:

Electrostatic spray gun

Compressed air supply

Powder feed hopper or container

Grounding of the object

Steps:

Ground the object: Ensures the charged powder is attracted to the surface.

Spray evenly: Hold the gun 6–12 inches from the surface, moving in smooth, overlapping strokes.

Apply sufficient powder: Ensure full coverage without excessive buildup.

Cure immediately: Transfer the sprayed item to the curing oven to fuse the powder into a solid coating.

Tips:

Maintain consistent speed and distance while spraying.

Use proper ventilation to reduce airborne powder accumulation.

Test a small area to check film thickness and color before full application.