Furniture Powder Coatings – Custom Colors & Textures

Surface Finish Options Overview

We are a leading Chinese powder coating factory with over 20 years of export experience, supplying high-quality coatings to furniture manufacturers, interior designers, and OEM suppliers worldwide. MOQ only 100KG, perfect for both prototyping and mass production.

Our Furniture Powder Coating Range

We offer a full selection of colors, finishes, and textures, including:

Custom Colors: RAL, Pantone, or your own sample

Surface Finishes: Smooth, matte, high-gloss, metallic, wrinkle, sand texture

Special Effects: Wood grain, stone/marble effects, hammer tone, pearl, metallic

Resin Systems: Polyester, Super Durable, Polyurethane, Epoxy

Common Challenges for Furniture Manufacturers

Scratches & Surface Wear – standard coatings can get damaged during use

Color Fading – poor UV resistance reduces aesthetic life

Limited Design Options – cannot achieve desired textures or decorative effects

High MOQ & Slow Delivery – difficult for small-batch or customized projects

Inconsistent Coating Quality – variations across batches

How Our Powder Coatings Solve These Issues

Scratch & Wear Resistant – maintain beauty and durability over time

UV & Fade Resistant – long-lasting color for indoor and outdoor furniture

Wide Design Flexibility – full range of textures, finishes, and effects

Flexible MOQ 100KG – ideal for small-batch or large-scale projects

Strict Quality Control – ISO-certified production with consistent batches

Fast Production & Shipping – meet tight project timelines

Applications & Advantages

Why Choose Us

✅ 20+ Years Export Experience – trusted by global furniture manufacturers

✅ Factory Direct Supply – competitive pricing, consistent quality

✅ Full Customization – colors, textures, decorative effects, finishes

✅ MOQ from 100KG – flexible for prototypes or bulk orders

✅ Free Samples Available – test before mass production

Contact us today to request FREE samples and a custom quotation for your furniture powder coating needs.

FAQ

1. What is Powder Coating?

Powder coating is a dry finishing process used to apply a protective and decorative coating on metal or other surfaces. Instead of using liquid paint, fine powder particles (usually made of polyester, epoxy, or hybrid resins) are electrostatically charged and sprayed onto a conductive surface. The coated object is then baked in an oven, where the powder melts, flows, and cures into a smooth, durable finish.

Key features:

Durable, hard finish

Resistant to scratches, corrosion, and UV

Environmentally friendly (no VOCs)

2. Benefits of Powder Coating

Powder coating offers several advantages over traditional liquid painting:

Durability: Resistant to chipping, scratching, fading, and wear.

Corrosion Protection: Provides excellent protection against rust and chemicals.

Environmentally Friendly: No volatile organic compounds (VOCs) and minimal waste.

Efficiency: Overspray can be collected and reused, up to 99% material utilization.

Uniform Finish: Smooth, even coating without runs or drips.

Cost-Effective: Single-coat systems can achieve high film thickness, reducing labor and energy.

Aesthetic Variety: Wide range of colors, textures, and effects.

3. What Temperature to Cure Powder Coating

The curing temperature depends on the type of powder used:

Epoxy powder: ~160–200°C (320–392°F)

Polyester powder: ~180–210°C (356–410°F)

Hybrid (Epoxy-Polyester) powder: ~180–200°C (356–392°F)

Typical curing time: 10–20 minutes depending on thickness and oven type.

Always follow the powder manufacturer’s specifications for best results.

4. Process for Powder Coating

The powder coating process usually follows these steps:

Surface Preparation:

Clean the surface thoroughly (remove oil, grease, rust, or dirt)

Methods: chemical cleaning, sandblasting, or phosphating

Pre-Treatment:

Apply a conversion coating or primer if needed to improve adhesion

Powder Application:

Spray the powder using an electrostatic spray gun or fluidized bed

Curing:

Bake the coated object in an oven at the recommended temperature for the powder type

The powder melts and forms a continuous, smooth film

Cooling & Inspection:

Let the coated item cool

Inspect for defects, uniform coverage, and desired thickness

5. How to Spray Powder Coat

Equipment Needed:

Electrostatic spray gun

Compressed air supply

Powder feed hopper or container

Grounding of the object

Steps:

Ground the object: Ensures the charged powder is attracted to the surface.

Spray evenly: Hold the gun 6–12 inches from the surface, moving in smooth, overlapping strokes.

Apply sufficient powder: Ensure full coverage without excessive buildup.

Cure immediately: Transfer the sprayed item to the curing oven to fuse the powder into a solid coating.

Tips:

Maintain consistent speed and distance while spraying.

Use proper ventilation to reduce airborne powder accumulation.

Test a small area to check film thickness and color before full application.