Medium Cure Powder Coating – Customized Finishes

Surface Finish Options Overview

We are a leading powder coating manufacturer specializing in Medium Cure Powder Coating that cures at moderate temperatures, offering an optimal balance between energy efficiency and coating performance. Based in China, our factory provides high-quality medium cure powders designed to deliver durable, smooth finishes while protecting heat-sensitive substrates. With a flexible MOQ of 100KG and competitive factory-direct pricing, we support your production needs with reliable supply and customization.

Why Choose Our Medium Cure Powder Coating?

Many manufacturers face challenges such as substrate deformation under high curing temperatures, long production cycles, and energy waste. Our medium cure powder coatings solve these issues by offering:

Moderate curing temperature range (typically 150°C–180°C) to protect substrates

Excellent adhesion, corrosion resistance, and impact strength

Reduced curing time and energy consumption compared to high-temperature powders

Wide range of customizable colors, textures, and gloss levels

Low MOQ and fast shipping from China factory direct

Product Advantages Overview

Typical Applications of Medium Cure Powder Coating

Request Your Free Sample Today

Try our premium medium cure powder coatings risk-free! Free samples are available to qualified B2B buyers.

Contact us with your project details and shipping address.

FAQ

1. What is Powder Coating?

Powder coating is a dry finishing process used to apply a protective and decorative coating on metal or other surfaces. Instead of using liquid paint, fine powder particles (usually made of polyester, epoxy, or hybrid resins) are electrostatically charged and sprayed onto a conductive surface. The coated object is then baked in an oven, where the powder melts, flows, and cures into a smooth, durable finish.

Key features:

Durable, hard finish

Resistant to scratches, corrosion, and UV

Environmentally friendly (no VOCs)

2. Benefits of Powder Coating

Powder coating offers several advantages over traditional liquid painting:

Durability: Resistant to chipping, scratching, fading, and wear.

Corrosion Protection: Provides excellent protection against rust and chemicals.

Environmentally Friendly: No volatile organic compounds (VOCs) and minimal waste.

Efficiency: Overspray can be collected and reused, up to 99% material utilization.

Uniform Finish: Smooth, even coating without runs or drips.

Cost-Effective: Single-coat systems can achieve high film thickness, reducing labor and energy.

Aesthetic Variety: Wide range of colors, textures, and effects.

3. What Temperature to Cure Powder Coating

The curing temperature depends on the type of powder used:

Epoxy powder: ~160–200°C (320–392°F)

Polyester powder: ~180–210°C (356–410°F)

Hybrid (Epoxy-Polyester) powder: ~180–200°C (356–392°F)

Typical curing time: 10–20 minutes depending on thickness and oven type.

Always follow the powder manufacturer’s specifications for best results.

4. Process for Powder Coating

The powder coating process usually follows these steps:

Surface Preparation:

Clean the surface thoroughly (remove oil, grease, rust, or dirt)

Methods: chemical cleaning, sandblasting, or phosphating

Pre-Treatment:

Apply a conversion coating or primer if needed to improve adhesion

Powder Application:

Spray the powder using an electrostatic spray gun or fluidized bed

Curing:

Bake the coated object in an oven at the recommended temperature for the powder type

The powder melts and forms a continuous, smooth film

Cooling & Inspection:

Let the coated item cool

Inspect for defects, uniform coverage, and desired thickness

5. How to Spray Powder Coat

Equipment Needed:

Electrostatic spray gun

Compressed air supply

Powder feed hopper or container

Grounding of the object

Steps:

Ground the object: Ensures the charged powder is attracted to the surface.

Spray evenly: Hold the gun 6–12 inches from the surface, moving in smooth, overlapping strokes.

Apply sufficient powder: Ensure full coverage without excessive buildup.

Cure immediately: Transfer the sprayed item to the curing oven to fuse the powder into a solid coating.

Tips:

Maintain consistent speed and distance while spraying.

Use proper ventilation to reduce airborne powder accumulation.

Test a small area to check film thickness and color before full application.